1. Gas Load
The owner should submit in writing the connected gas load and the
pressure required at the meter outlet (measured in inches of water
column) to an NSTAR sales representative.
2. Gas Service Line
The owner should provide the sales representative with a scaled
utility site plan identifying the footprint of the building and the
location for all other utilities. The sales representative will
identify the route for the gas service line. The owner should
identify any underground barriers on their property (i.e. septic
system, sprinkler system, underground electric lines, oil tanks,
well, invisible fence etc.) and will be required to provide any
necessary permits or recorded easements.
3. Meter Location
A sales representative will indicate agreed upon location on the
Application for Gas Service, site plan, and the foundation of the
building if it has been erected. If a change is required, the owner
is responsible for notifying NSTAR prior to the installation.
4. Evaluation Process
Engineering approval may be necessary based on load requirements.
The owner will provide a check for any necessary contribution or
deposit for the gas service and will sign the NSTAR Application for
Gas Service. If a change is required, the owner is responsible for
notifying NSTAR prior to the installation.
5. Pre-Mark
NSTAR Gas will identify the boundaries of excavation with white
spray paint.
6. Dig Safe - 888-DIG-SAFE (888-344-7233)
NSTAR Gas will notify
Dig Safe
to identify, locate and mark underground utilities.
7. Road Opening Permit
NSTAR Gas will apply for city/town/state permit(s) (if applicable).
8. Schedule Gas Service Line Installation
Prior to installing the gas service to:
- Existing Structure - a representative of the NSTAR Gas Distribution Department will contact the owner in advance with a tentative construction date.
- New Construction - the contractor must contact NSTAR Gas when all criteria have been met (all other utilities installed and within 6” of final grade).
9. Gas Service Line Installation
An NSTAR Gas or subcontractor crew will install service line from
street to foundation. Open trench installations by your own
excavator must be arranged through the NSTAR Gas distribution
department. Your sales representative can provide you with the
necessary contact person and requirements.
10. Gas Meter Installation
After the service has been installed and you have met all the
requirements, call your sales representative to schedule the date
for a gas meter. Here's a
checklist of steps
you should follow before calling us.
11. Restoration
The owner is responsible for the restoration of private property.
NSTAR will restore the public property based on the town/city
guidelines.
